Share
Export Citation
Semiconductor TiO2 Coating Deposited by Microwave Plasma Method
Novriany A.
Key Engineering Materials
Q4Abstract
Transparent conducting glass is a crucial layer of Dye Synthesized Solar Cell (DSSC), due to it allows sunlight penetrating to the solar cell. DSSC has a low efficiency until semiconductor Titanium Dioxide (TiO2) was employed as the anode material. TiO2 has a high photosensitivity, high structure, stability under solar irradiation and in solution, and low cost. In this study TiO2 was deposited on the conductive glass using microwave plasma method. Plasma was generated using electromagnetic wave from microwave magnetron. TiO2 powder was dissolved using pure water and ethanol at different concentration. The coating process was conducted on a 2.5 x 2.5 cm of a conductive glass, and the effect of plasma generation time was observed at 0.5, 1, 2, 3, and 5 minutes. The thickness, roughness, and microstructure of TiO2 coating on the conductive glass was observed using 3D measuring laser OLS4100. The result shows that the fabrication of TiO2 coatings using microwave plasma is feasible. The concentration of solution and plasma generation time plays an important role to the thickness, roughness, and microstructure of TiO2 coatings. An optimum result was obtained at plasma generation time of 0.5 minute with 12.49 μm and 3.398 μm of thickness and roughness respectively using 10 g TiO2 + 50 ml ethanol and 40 ml H2O.