# Correlation of concrete by using small core diameter
> Rakhman Y.

URL kanonis: https://discover.unhas.ac.id/publications/pub_scopus_85079685086
Jurnal / Konferensi: Iop Conference Series Earth and Environmental Science
Tahun terbit: 2020
DOI: https://doi.org/10.1088/1755-1315/419/1/012045
ISSN: 17551307
Citations: 1

## Authors
- Rakhman Y.

## Abstract
Abstract One of the causes of limited sampling on concrete structures is that there is reinforcement in the concrete structure so that when using a large diameter drill core, can damage the concrete structure. Therefore, a study of small diameter concrete was conducted to predict the compressive strength of cylindrical concrete. Test specimens in the form of concrete cylinders with dimensions 10 cm x 20 cm, two concrete plates with dimension 45cm x 45cm x 13cm, and four concrete beams with dimensions 70 cm x 30 cm x 15 cm by taking concrete using a drill core diameter of 2″ and 1″. Two concrete slabs and two concrete beams with concrete strength (f′c) 20 MPa (MSA 20mm and 10mm) while two concrete slabs and two concrete beams with concrete strength (f′c) 30 MPA (MSA 20mm and 10mm). Types of tests carried out include testing the compressive strength of concrete, core concrete normality test, modulus of elasticity and compressive strength of the core concrete. From test results, can be concluded that the compressive strength of core concrete with sample in the direction of casting for a diameter of 2 inches and concrete strength of 20 MPa (MSA 20 mm and 10 mm) meets the requirements and can be recommended with number samples of 25, whereas for diameter 1″ the number of samples must be added.

## Keywords
- Compressive strength
- Materials science
- Composite material
- Casting
- Core (optical fiber)
- Structural engineering
- Young's modulus
- Drill
- Geotechnical engineering
- Elastic modulus
- Geology
- Engineering
- Metallurgy

---
Sumber: Discover Unhas — RIMS Universitas Hasanuddin.
Saat mengutip, gunakan DOI bila tersedia atau URL kanonis di atas.