esc

Type at least two characters to start searching.

↑↓ select↵ openesc close

Share

Export Citation

APA
MLA
Chicago
Harvard
Vancouver
BIBTEX
RIS
Universitas Hasanuddin
Research output:Contribution to journal›Article›peer-review

Stiffness Characterization of Stone Matrix Asphalt Using Ultrasonic Pulse Velocity and Dynamic Modulus Models

Tjaronge H.K.

Civil Engineering and Architecture

Q2
Published: 2026

Abstract

Direct measurement of dynamic modulus still has several limitations, as it requires specialized equipment, complex testing procedures, and relatively long testing times. This study aimed to evaluate the stiffness of Stone Matrix Asphalt (SMA) mixtures incorporating Portland Composite Cement (PCC) filler using Ultrasonic Pulse Velocity (UPV), shear modulus, and the dynamic modulus prediction models proposed by Witczak and Al-Khateeb. SMA mixtures were prepared with asphalt contents of 5.0%, 5.5%, and 6.0%. The results showed that the mixture containing 5.5% asphalt exhibited the most stable wave propagation pattern and the highest UPV value of 3,542.08 m/s. At this asphalt content, the UPV-based dynamic modulus and shear modulus reached their maximum values of 17,760 MPa and 6,580 MPa, respectively. The Witczak model predicted dynamic modulus values ranging from 4,189.63 to 6,345.60 MPa, whereas the Al-Khateeb model produced lower estimates, approximately 2,700–2,900 MPa. Overall, UPV proved to be an effective and non-destructive technique for rapidly characterizing the internal condition and small-strain, high-frequency stiffness of SMA mixtures, with the 5.5% asphalt content yielding the highest UPV-based stiffness among the three contents tested.

Access to Document

10.13189/cea.2026.140611

Other files and links

Fingerprint

AsphaltSciences
Materials scienceSciences
Dynamic modulusSciences
StiffnessSciences
Composite materialSciences
Shear modulusSciences
ModulusSciences
Ultrasonic sensorSciences
Composite numberSciences
Dynamic shear rheometerSciences
Portland cementSciences
Elastic modulusSciences
Bulk modulusSciences
Characterization (materials science)Sciences
Young's modulusSciences
Matrix (chemical analysis)Sciences
Asphalt concreteSciences
Shear (geology)Sciences
Dynamic mechanical analysisSciences
Specific modulusSciences
Ultrasonic testingSciences
Geotechnical engineeringSciences
MicromechanicsSciences
Time–temperature superpositionSciences