# Secant stiffness and failure modes of EBF frames using castellated beams > Parung H. URL kanonis: https://discover.unhas.ac.id/publications/pub_scopus_105055693553 Jurnal / Konferensi: Procedia Structural Integrity Tahun terbit: 2026 DOI: https://doi.org/10.1016/j.prostr.2026.08.112 ISSN: 24523216 Citations: 0 ## Authors - Parung H. ## Abstract One structural system that meets the requirements for earthquake-resistant design is the steel Eccentrically Braced Frame (EBF) system. The concept of EBF earthquake-resistant design is that link elements are designed to undergo damage and dissipate energy, while other elements outside the link are expected to remain elastic. Castellated steel beams are alternative materials for link elements because their greater moment of inertia provides higher stiffness than conventional steel beams. In this study, three castellated link test specimens were tested with link lengths of 450 mm, 650 mm, and 870 mm. The steel beam used was IWF 150,75,7.5,5, which was transformed into a castellated steel beam. The test showed that, once the specimens reached the initial yielding state, each exhibited different behavior, resulting in different secant stiffness values. This difference indicates that variation in link length affects the secant stiffness, reflecting differences in the specimens’ ability to resist deformation after passing through the elastic phase, thereby impacting the overall structural response. The failure mode at yield was characterized by the formation of a significant inelastic rotation angle upon deformation. Each specimen exhibited a different failure mode. The CL-450 test specimen failed at the connection between the beam and the column; the CL-650 test specimen failed at both the beam-link connection and the beam-column connection. The CL-870 test specimen failed in the link area. ## Keywords - Structural engineering - Stiffness - Beam (structure) - Failure mode and effects analysis - Materials science - Connection (principal bundle) - Deformation (meteorology) - Moment of inertia - Composite material - Moment (physics) - Rotary inertia - Inertia - Rotation (mathematics) - Steel frame - Yield (engineering) - Structural system - Base (topology) - Frame (networking) - Link (geometry) - Seismic analysis - Mode (computer interface) - Tensile testing - Finite element method - Ultimate failure --- Sumber: Discover Unhas — RIMS Universitas Hasanuddin. Saat mengutip, gunakan DOI bila tersedia atau URL kanonis di atas.