Share
Export Citation
Secant stiffness and failure modes of EBF frames using castellated beams
Parung H.
Procedia Structural Integrity
Abstract
One structural system that meets the requirements for earthquake-resistant design is the steel Eccentrically Braced Frame (EBF) system. The concept of EBF earthquake-resistant design is that link elements are designed to undergo damage and dissipate energy, while other elements outside the link are expected to remain elastic. Castellated steel beams are alternative materials for link elements because their greater moment of inertia provides higher stiffness than conventional steel beams. In this study, three castellated link test specimens were tested with link lengths of 450 mm, 650 mm, and 870 mm. The steel beam used was IWF 150,75,7.5,5, which was transformed into a castellated steel beam. The test showed that, once the specimens reached the initial yielding state, each exhibited different behavior, resulting in different secant stiffness values. This difference indicates that variation in link length affects the secant stiffness, reflecting differences in the specimens’ ability to resist deformation after passing through the elastic phase, thereby impacting the overall structural response. The failure mode at yield was characterized by the formation of a significant inelastic rotation angle upon deformation. Each specimen exhibited a different failure mode. The CL-450 test specimen failed at the connection between the beam and the column; the CL-650 test specimen failed at both the beam-link connection and the beam-column connection. The CL-870 test specimen failed in the link area.
Access to Document
10.1016/j.prostr.2026.08.112Other files and links
- Link to publication in Scopus
- Open Access Version Available