Share
Export Citation
Dataset on the characteristics of mixed shrub-coffee husk bio-pellets under selected thermo-compression conditions
Pangestu K.T.P.
Data in Brief
Q1Abstract
This data article provides a comprehensive, measurement-level dataset on the physicochemical, mineral, thermal, and combustion characteristics of bio-pellets. The bio-pellets were manufactured from three lignocellulosic feedstocks: Gliricidia sepium (Gamal) shrub, Leucaena leucocephala (Lamtoro) shrub, and coffee husk (Coffea canephora) waste. Bio-pellets were produced from six Gamal:Lamtoro:Coffee-husk (G:L:C) weight ratios (0:1:1, 1:0:1, 1:1:0, 1:1:2, 1:2:1, and 2:1:1). Each pressed in a custom-built thermo-compression pelletizer at two molding temperatures (180°C and 225°C) combined with two molding durations (3 min and 5 min), giving 24 composition-by-molding-condition treatment combinations. For most response variables, three replicate pellets were produced and measured per treatment combination (n = 3). Mineral content, calorific value, and thermogravimetric/differential scanning calorimetry (TGA/DSC) measurements were performed in singlicate (n = 1), several of them at an external commercial testing laboratory. The dataset reports raw and mean ± standard deviation values for five proximate parameters (density, moisture content, ash content, volatile matter, and fixed carbon content), four mineral parameters (sulfur, Na 2 O, K 2 O, and Cl content), gross calorific value, stage-wise combustion mass loss and combustion rate recorded over a 30-minute open-furnace burn test, water uptake and longitudinal/transversal/volumetric dimensional swelling after 10-second water immersion, and high-resolution TGA/DSC scans (30–1000°C, 10°C/min) for the 1:1:2 composition (the formulation with the highest measured calorific value in the dataset) at all four molding conditions. Two-way analysis of variance (ANOVA) outputs comparing the effects of feedstock composition, molding treatment, and their interaction are included alongside the raw measurements for each response variable. Raw material sourcing and preparation, and pelletizing parameters (16 mm die diameter, 20 mm target pellet length, 25 kg/cm² pressing pressure) are documented in sufficient detail to reproduce the production process. The dataset supports comparative assessment, hypothesis generation, experimental planning, and integration with compatible biomass-pellet datasets. It also provides preliminary information for evaluating feedstock mixtures and thermo-compression conditions for solid-biofuel development. This dataset consolidates and extends the raw and analyzed data underlying two related, separately published research articles that reported, respectively, on the proximate/mineral/thermal characteristics and on the combustion performance/water absorption of the same set of bio-pellets, allowing other researchers to re-examine, reanalyze, or combine the individual measurements without repeating the original production and testing procedures.
Access to Document
10.1016/j.dib.2026.113367Other files and links
- Link to publication in Scopus
- Open Access Version Available