Share
Export Citation
Design of centrifuge machine and fatigue analysis of centrifuge machine shaft in the processing of porang
Cavalier D.D.
Iop Conference Series Earth and Environmental Science
Abstract
Porang is considered a leading export commodity due to its high potential and demand, especially in international markets. To support its processing, a centrifuge machine is used to separate calcium oxalate from porang tubers by utilizing centrifugal force based on particle size and density. The method involved calculating the machine’s capacity, power requirement, and torque. The machine components were determined using the Design, Requirement and Objectives (DR&O) method, followed by designing the model using SolidWorks. A static and fatigue analysis was conducted on the shaft to determine its service life. The components of the centrifuge machine were the assembled into a complete design. The objectives are to design a porang centrifuge machine, identify the required components, determine the torque of the machine, and perform a fatigue analysis simulation of the shaft. The results show that the machine consist of nine components. The static analysis yielded values for stress, displacement, and safety of factor on the shaft. The fatigue analysis yielded values for fatigue life and fatigue damage. The conclusion from this study is that the main components in the centrifuge machine design include the frame, inner tube, outer tube, door, nozzle, shaft, coupling, bearing, and electic motor. The torque generated by the centrifuge machine is 5,04 Nm. Based on the fatigue analysis, the shaft is suitable for long-tern use.
Access to Document
10.1088/1755-1315/1655/1/012065Other files and links
- Link to publication in Scopus
- Open Access Version Available